Select Page

Audi, VW, CCD Rear Camera Boot-Lid colour reversing camera

 

£69.99

CCD Boot Handle Design For AUDI VW Original Car Rear View Reverse Camera

3 in stock (can be backordered)

Volkswagen:
2009/2010 Passat, Tiguan
2012 Sagitar, 2012 Lavida, Touareg

Audi:
2012/2013 Audi A4L/A6L
Audi A3 S5 Q3 Q5 A8L RS6

 

Please double check and make sure the model and size (truck handle) fits your car exactly before purchasing.

Unit dimensions: 113mm (length) x 48mm (height) x 30mm (depth – approximately)

This HD CCD high quality Waterproof Rear view Camera with color wide angle lens is designed to FIT VW / AUDI specific cars and can be directly bolt on, no hole drill and screw need.

It is a DIY (do-it-yourself) unit. By simply pairing this unit with a LCD monitor or car DVD player through the included AV cable, it help you get a full view of what may show up suddenly in blind spots and makes a great upgrade to your VW / AUDI car.
Special design to replace the truck handle of original vehicles and fit perfectly. No any damage installation!

Features:

• HD CCD color sensor

• Pre-wired rear view camera

• Easy reversing and parking

• Directly replace original design perfectly, No hole drill and screw need.

• For VW / AUDI specific models

• Shockproof, Waterproof IP68 and Weathre-resistance

• 170 degree wide angle view

• Nightvision, Clear View even in the Night

• Image Distance Guider Lines

Image Sensor

CCD

TV System

PAL/NTSC optional

Effective Pixels

720*576 pixels

Horizontal Resolution

520TVL

Sensing Area

3.6mm*2.7mm

Shutter Speed

1/60-1/10000

Minimum Illumination

0.1Lux/F=1.2 (0Lux with IR ON)

Video Output

1.0v P-P at 75ohm

Power Supply

DC 12V

Lens angle

135°

Waterproof

IP68

White balance

Auto

Operating Temperature

-20℃-75℃,RH 95% MAX

Storage Temperature

-40℃-85℃,RH 95% MAX

Note: PAL/NTSC are optional, NTSC is in default and PAL provide per your request

Most monitor is suitable for both PAL and NTSC

Installation Guide:

• Take out your truck handle at the back of your car.

• Fix the camera to where the truck handle was.

• Connect the power of the camera to your car reverse lights – red wire to positive and black wire to negative.

• Connect the video cable of the camera to the extension cord.

• Connect the extension cord to your car monitor.

• The driver will see the images when the car is in reverse shift.

Please Note: This camera will only work with an Aftermarket Audi A3i.e. DriveAudio Sat/Nav Screen or separate dashboard monitor. WILL NOT WORK WITH ORIGINAL FACTORY FITTED AUDI SAT/NAV SCREEN.

Video

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.